Honeywell Minitrend QX User Manual Download Page 60

Page: 60 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK

To fit the Analogue Input option card (Slot B) into the

eZtrend QXe

recorder you will require

an expansion card to interface to the recorder.

“QXe Analogue Input (Standard) card” on

page 19

Analogue In Menu

(Main Menu > Configure > Setup > Edit Setup> Field IO > Analogue In)

Press the Analogue In button to display all the analogue inputs available.

Click on individual Analogue In number to set up each channel profile. Each channel has a
list of menu items to be configured.

Refer to connection details and

“Analogue Input Channel Numbers” on page 17.

•

Enabled

- Toggle On and Off.

•

Type

- Select this for a list of available Signal Inputs.

•

Sample Rate

- Select this for a list of available Analogue Input sample speeds. A Fast

Scanning range of 50Hz (20ms) is available as a firmware option (not available for the

eZtrend QXe

recorder)

See “Firmware Credit System” on page 201.

Arranged in 2 banks of 3 inputs, and sample rate must be the same within each bank,
only for

eZtrend QXe

recorder

eZtrend QXe

Slot position

Card type

Channel

numbers

Slot A

3 Analogue Inputs
6 Analogue Inputs

1 to 3
1 to 6

Slot B option card

6 Analogue Inputs

9 to 14

Slot G

4 Relay Output
8 Relay/2 Digital In
8 Digital Input/Output

1 to 4
1 to 8
1 to 8

The Analogue In screen
displays all the available
Analogue Input channels.

Each channel displays its’
individual settings.

Select a numbered chan-
nel to edit the configura-
tion of each input

Menu path to current menu

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands