Honeywell Minitrend QX User Manual Download Page 222

Page: 222 / 324

216

43-TV-25-30 Iss.6 GLO Aug 07 UK

Communications Server

Comms Server Overview

The

Comms Server

and the

Database server

will automatically become active when the

TrendServer

software is running. Refer to the

TrendManager Pro Suite Software

Manual, Installation instructions. The Comms server will enable the user to:

• Monitor the status of communications with a device on any serial port, up to 8 ports and an

Ethernet connection.

• Set up local and remote databases

• Set up local and remote servers

• Modbus protocols supported on Ethernet and Serial ports

• Enable and disable ports

• Add, edit and remove devices

• Log to database or client connections, local or OPC client.

The comms server will appear as an icon in the system task bar in the bottom right of the
PC screen.

Start up

The Communications Server appears as an icon in the Windows

™

system

bar at the bottom right of the screen. Double click or right click to open, loads
automatically with

TrendServer

. The comms server manages the commu-

nications status of devices on a serial port (RS485) or through an Ethernet
connection. Only Modbus protocol is available for

X Series

devices, see

“Modbus” on page 206.

Comms Server
Administration
and Toolbar

Database Servers

Communications
Ports

Figure 8.5

Comms Server
Overview

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands