Honeywell Minitrend QX, User Manual

Page: 122 / 324

116 43-TV-25-30 Iss.6 GLO Aug 07 UK
Select the Scheduled button to reveal the scheduled menu.
Schedule Export - Tick to enable.
Export Device - Select the device you wish to export data to. USB1 is the first USB device
to be fitted and USB2 is the second one fitted, front or rear of the recorder. Compact Flash
not available
for the
eZtrend QXe and the rear USB port is only available as an option
.
Update Period - Select how often you wish data to be exported from the list provided; 10,
30 minutes, 1, 2, 12 or 24 hours.
Log Messages - Tick to add a message to the messages list when a scheduled export has
been performed
Mark Chart - Only active when Log Messages is enabled. Tick to mark the chart when a
scheduled export has been performed.
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
If a manual Export Now is in progress during the time when a Scheduled export is to occur,
the scheduled export will hold off until the manual export is finished.
Storage Bias
(Main Menu > Configure > Setup > Edit > Edit Recording > Storage Bias)
An adjustable slider can be used to determine how much internal flash memory is allocated
for storing chart data and how much internal flash memory is allocated to storing logged da-
ta. The User can adjust the slider to increase and decrease the internal flash memory stor-
age allocation.
Displayed under the Total Available Space bar is the amount of internal flash memory allo-
cated to chart and log data. This will update as you move the slider. The amounts shown
display how much time it will take to fill the internal flash memory allocations, at the current
chart speed, before the data will start to be recycled.
The default for the slider, time coverage wise, is set to not have any bias to either chart or
logged data. The recorder is set to balance, time coverage wise, the chart and logged data
equally depending on how many pens are enabled and what current chart speeds are set.
As you move the slider to the right, towards Chart, you will notice the allocated internal flash
memory space for the chart data will increase in the bar above the slider. As you move the
slider to the left, towards Log, you will notice an increase in the internal flash memory for the
Log data in the bar above the slider.