Honeywell Minitrend QX User Manual Download Page 70

Page: 70 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK

Pens Menu

(Main Menu > Configure > Setup > Edit Setup> Pens)

Select the Pens button to display all the pens available.

Click on individual pen number to set up each pen profile.

•

Enabled

- Toggle On and Off.

•

Tag

- Select and use the on-screen keyboard to type in an identifier for the pen. Up to

48 characters.

•

Description -

(Screen Designer screens only) This field is so a label on a Screen

Designed screen can display a description.

•

Maths Type

- Analogue signals may have a mathematical calculation performed on

them before they are represented as a pen. Basic maths is standard in all recorders.
Full Maths or Math Scripting are options that must be activated.

See “Options” on

page 157.

•

Edit Maths

- Edit the Maths for this particular pen. For details see

“Appendix B:

Maths Expressions” on page 271.

•

Scale

- Select Scale to go to a sub menu to set up the scale parameters.

See “Scale

Menu” on page 65

•

Logging

- Select Logging to go to a sub menu to set up the logging configuration.

See

“Logging Menu” on page 66

•

Alarms

- Select Alarms to go to a sub menu to set up the alarm profile.

See “Alarms

Menu” on page 68

•

Totaliser

- Select Totaliser to go to a sub menu to set up the totaliser settings.

See

“Totaliser Menu” on page 70

• RAV -

This will display the Rolling Average for this pen. The recorder takes an average

of the number of samples entered.

Enable

the RAV function and enter the

Number of Samples

(Max 500). Then enter the

Sample Interval

, or how often a reading is taken, in seconds. The

Prefill

will add in

The Pens screen displays
all the available pens.

Each pen displays its

scale settings.

Select a pen number to
edit the setup of each pen
including the Scale,

Logging, Alarms and

Totaliser

Menu path to current menu

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands