Honeywell Minitrend QX User Manual Download Page 209

Page: 209 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK

203

•

Serial No. -

read only and cannot be edited.

•

Credits -

read only and cannot be edited. It displays the number of Credits available to

activate additional firmware functionality including the total credit value.

•

Options Code -

the Options code is a unique coded number for this recorder that contains

information that enables certain functionality including credit value.

• Options - Select the Options button

• This displays how may credits are currently in use.

• Select Options to produce a list of Firmware options available with their credit values.

The number or credits required is shown in brackets.

• Toggle each option On or Off to enable the feature within the recorder.

• More credits are available from your supplier.

Summary of Contents for Minitrend QX





































































































































































































































































































































Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands

Honeywell Minitrend QX, User Manual

Search results

Summary of Contents for Minitrend QX

Reviews:

Related manuals for Minitrend QX

Brands by name

Popular brands