LYNX Touch Installation and Setup Guide
- 22 -
Mechanics of Programming
Navigating Menus
Security Screen
System Status is displayed at the top of each screen and the time and date are displayed at the bottom of the
Security Screen. The Security menu Screens differ between the LYNX Touch L5200 and the L7000 versions.
Refer to the paragraphs below for additional information.
Security Menu
The Security Screen consists of two pages. The first page displays the system status and selection “icons”
and “tabs”. The displayed pages and options may vary slightly depending upon the devices and services that
are installed in or connected to the system.
Selection Function
Zones
Provides access to Zone information and options.
System
Provides information about system status
Arm Away
Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay
Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Message
Provides access to Message Center.
Phone
Provides access to Speaker Phone mode. (if programmed L5200 only)
Delay/Instant
Used to toggle between exit delay and instant arming options
More
Advances system to second page of the Home Screen.
The second page also displays the system status and additional selection “icons” and “tabs”.
Selection Function
Tools
Provides access to Installer and User Programming Menus (Master User Code required for access).
Arm Away
Used to Arm the system in Away mode (displayed on both Home Screen pages).
Arm Stay
Used to Arm the system in Stay mode (displayed on both Home Screen pages).
Settings
Provides access to various keypad functions (i.e.; Brightness, Contrast, Volume, Voice, Chime & Ringer).
Delay/Instant
Used to toggle between exit delay and instant arming options (displayed on both Home Screen pages).
Back
Returns system to first page of the Home Screen.
Installer Tools Menu
The Tools/Installer Menu provides access to the
Installer configurable features and displays six
options. Entering the Installer Code is required to
access the Installer Menu.
Note:
For information regarding the Rules, Events and
Schedules programming screens, refer to the User
Manual.
S
y
s
tem Progr
a
mming...
5200-100-092-V0
Te
s
t
Progr
a
m
Event
s
S
ched
u
le
s
Initi
a
te
Downlo
a
d
s
R
u
le
s
Installer Tools Menu Page
User Tools Menu
The User Menu provides access to the User
configurable features and displays eight options.
Entering the Master User Code is required to access
the User Menu.
WiFi Config
Date Time
Ready To Arm
E
v
ents
Back
Reminders
Keypad
Users
5100-100-006-
V
0
Slide Show
Test
User Tools Menu Page
