Honeywell LYNX Touch L7000 Series Installation And Setup Manual Download Page 43

Page: 43 / 88

LYNX Touch Installation and Setup Guide

- 43 -

Programming the Control

Program Reporting (Continued)

SCREEN ACTION

Report All

Press to Report All

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”.
If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to
return to the Reporter options screen.

Report Alarms

Disabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.

Report Troubles

Disabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.

Report Open/Close

Disabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.

Report Tests

Disabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.

Follow Me Phone 2

Note:

The Follow Me feature is not available on the LYNX Touch L7000/L7000CN.

Select “Follow Me Phone 2” to program the “Follow Me” Reminder telephone number 2.

Phone Type

None

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Phone Type”. The System toggles between “None” and “Follow Me”.

Phone Number

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Phone Number”. Enter the “Follow Me” Phone Number 2 on the displayed keypad.

Report All

Press to Report All

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Report Alarms

Enabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.

Report Troubles

Enabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.

Report Open/Close

Disabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.

Report Tests

Enabled

Note:

This field is not available on the LYNX Touch L7000/L7000CN.

Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.

Report Selection

Select “Report Selection”. The System displays the following options:

Arm Away

Arm Stay

Disarm

Exit Error

Recent Closing

Event Log Full

Trouble

Trouble Restore

Use the down



arrow to scroll to the next page of options.

Alarm Restore

Alarm Cancel

Test

Test Restore

Bypass

Bypass Restore

AC Loss

AC Loss Restore

Use the down



arrow to scroll to the next page of options.

Low Battery

Low Battery Restore

RF Low Battery

RF Low Battery Restore

Arm Away

Enabled

Select “Arm Away”. The System toggles between “Disabled” and “Enabled”.

Summary of Contents for LYNX Touch L7000 Series

























































































Search results

Summary of Contents for LYNX Touch L7000 Series

Reviews:

Related manuals for LYNX Touch L7000 Series

Brands by name

Popular brands

Honeywell LYNX Touch L7000 Series, Installation And Setup Manual

Search results

Summary of Contents for LYNX Touch L7000 Series

Reviews:

Related manuals for LYNX Touch L7000 Series

Brands by name

Popular brands