HTRD400 System Reference Guide
Rev 1.02
151
Document 900.0328
05/05
Interface Connector—Power, Signaling, and GPS—Schematic
shows the wiring harness on the bus. The INTERFACE port contains:
•
Eight programmable trigger inputs
•
Power in for the HTRD400 System
•
GPS power and GPS data signaling
Figure E-1
Interface Connector—Power, Signaling, and GPS
25-Pin Interface Connector Pinouts
provides the pinouts for the DB25 INTERFACE connector.
Signal feature harness
Triggers 1 to 8
Red
Battery (POS)
Black
Battery (NEG)
Brown
Input signal 2
White
Input signal 1
Black
Input signal 3
Green
Input signal 4
Red
Input signal 5
Blue
Input signal 6
Yellow
Input signal 8
Orange
Input signal 7
Red
Red Power Input on HTRD4GPS module
Black
Black Power Input on HTRD4GPS module
White
White Data Input on HTRD4GPS module
Green
Green Data Input on HTRD4GPS module
Power
Power harness
20 foot cables
DB25 INTERFACE
connector
DB9 adapter cable
Table E-2
25-Pin Interface Connector Pinouts
Pin
COM connector
1
N/C
2
N/C
3
N/C
4
Trigger 2
5
N/C
6
Trigger 1
7
Trigger 3
8
Trigger 4
9
Trigger 5
10
Auxiliary Power. Reserved.
Summary of Contents for HTRD400
