Rev 1.02
130
Document 900.0328
05/05
Networking
Figure C-1
Stand-alone System Diagram
APIPA
The HTRD400 System uses Microsoft APIPA (Automatic Private IP Addressing) policy to
enable each device (HTRD400 Recorder, HTCD Digital Camera, or PC) to automatically
determine a unique IP address for itself in the absence of DHCP (Dynamic Host
Configuration Protocol) network services.
When you connect a PC or laptop to n HTRD400 Recorder, Microsoft Windows uses APIPA
to automatically determine a unique IP address for the PC. In the Windows environment,
APIPA first waits for over a minute for a response from a DHCP server. If no DHCP server
responds in that time, it automatically chooses an APIPA address.
If you have a PC or laptop that you use exclusively to connect to an HTRD400 Recorder and
you are familiar with how to set a static IP address using the Windows Network Settings
Control Panel (or have access to an IT network administrator for assistance), then you may
find it convenient to set a static APIPA address for the dedicated PC. A static IP address
means that the PC can quickly establish a session with an HTRD400 Recorder after you
have physically connected to it.
Standard PC or laptop
connection via CAT5
Ethernet crossover cable
Physical connection
Network topology
HTRD400 Recorder
HTRD400 Recorder
Summary of Contents for HTRD400
