HTRD400 System Reference Guide
Rev 1.02
125
Document 900.0328
05/05
3.
Verify the triggers. Be sure to confirm that the wiring is correct by verifying the current
status. Click Next after verifying the status.
4.
On the Camera Summary window, select a camera from the list, and then click Add.
The Camera Edit dialog box displays.
5.
Select a MAC address for the camera from the MAC drop-down box. Enable the audio
for the camera, if desired. Verify that audio and video is from the correct camera
before proceeding. This is particularly important in multi-camera systems. Click OK.
6.
Confirm your changes on the Camera Summary window. When you are satisfied, click
Next.
If the MAC address shows
as
Offline
, it indicates
that the camera is not yet
connected to the recorder.
Summary of Contents for HTRD400
