Rev 1.02
126
Document 900.0328
05/05
Factory Set Configurations
7.
Confirm the camera coverage on the Coverage screen. Note that there should not be
audio on this screen. To see an enlarged preview, click Zoom. To save a picture (in
.jpg format), click Snap. When you are satisfied, click Next.
8.
(Optional) Enable GPS data gathering, if a GPS module is connected. Click Next.
9.
Review the rule summary (see
satisfied, click Next.
Select the Record GPS data
when a rule is active check box
as shown, before the recorder
can gather and record GPS data
when any rule is active. The
recorder may take up to one
minute to detect the GPS unit
and the GPS may take up to five
minutes to acquire a signal.
Summary of Contents for HTRD400
