Honeywell HNVE1, Reference Manual

Page: 62 / 92

62
Encoder and Device Configuration
Configuring a PTZ Dome
The PTZ Dome Setup Tab provides access to the settings used to configure the PTZ
functions. The selections made in the
Board Setup tab determine which settings are
available. See Table 5-1 for the settings available for each PTZ Dome protocol.
Table 5-1 PTZ Dome Settings Based on Protocol Selections
Figure 5-3 shows the options available for the Diamond and IntelliBus
TM
protocols.
Figure 5-3 PTZ Dome Setup View
Protocol Preset
Details Mimic
Tour
Details Preset
Tour
Details Camera
Menu
Pelco P Yes No No No
Pelco D Yes No No No
Diamond Yes Yes Yes Yes
IntelliBus
TM
Yes Yes Yes Yes
VCL No No No No
MAXPRO-Net No No No No
The PTZ control provides
the same functionality as a
traditional keyboard/joystick
controller.
Program presets, mimic tours,
and preset tours.
The camera menu is available
only for IntelliBus or Diamond
camera protocols. See
Opening and Displaying the
Camera Menu
on page 67 .