Honeywell HNVE1, Reference Manual

Page: 28 / 92

28
Installing the Honeywell IP Utility and Web-Client Software
The IP Utility enables users to:
• Discover device(s) on a network
• Configure the IP network settings, name device(s), upgrade firmware, change
passwords
• Open individual Web-Client applications for each discovered device.
About the Web-Client
The Web-Client is the web-based application that enables users to:
• View live streaming video
• View the device network settings and firmware details
• Configure and run mimic or preset tours (when applicable)
• Configure compression and video analytics settings
Administrator and Guest User Profiles
Both the Honeywell IP Utility and the Web-Client have two user types: Administrator and
Guest. However, the number of users that can log on at the same time differs.
IT Utility
Only one Administrator and up to four Guests can be logged on at a time.
Web-Client
Up to six Web-Client users can be connected at the same time, in any combination of
Administrator and Guest users that totals six. For example, six Administrators can log on at
the same time, or six Guests, or three Administrators and three Guests, or two
Administrators and four Guests.
After the IP Utility and Web-Client software is installed, you can change the Administrator or
Guest passwords.
Table 3-1 describes the roles and privileges for these users: