HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B
29
11/09
Confirming Your System Requirements
Note
Windows administrator privileges are required to install the Honeywell IP
Utility and associated software.
Note
Contact the network administrator if there are any questions regarding the
local area network (LAN) or any other network related issues.
Install the Honeywell IP Utility on a work station with the minimum requirements in
Table 3-2
. After the IP Utility is installed, the same computer work station can be used to
access the Web-Client.
Table 3-1
User Profiles for Honeywell IP Utility and Web-Client
Interface
Administrator
Guest
Honeywell IP Utility
•
View the list of devices available and
connect to the devices
•
Configure the IP network settings
•
Upgrade firmware
•
Change the password to access the
IP Utility application
•
Change the access passwords to the
Web-Client application
•
View the list of devices available on the
network
•
View system settings, including device
name, IP address, and MAC address
Web-Client*
•
View video and network settings, start
presets and tours
•
Configure presets, tours, sectors, and
privacy zones, video analytics and
Codec parameters
•
Enable NightShot and backlight
modes, and use the Flashback
function (camera dependent)
•
Guest users are limited to the Live View
tab where they can view video, select
presets, and start tours
•
Configure up to four presets while
viewing video
•
Enable NightShot and backlight modes
and use the Flashback function (camera
dependent)
* The features available on the Web-Client depend on whether it is a fixed or PTZ dome.
Table 3-2
PC Minimum System Requirements
Component
Requirement
Operating System
Windows XP® or WINServer 2003
Processor
Intel
®
Pentium
®
IV, 2.4 GHz or faster
RAM
512 MB or higher
Web Browser
Microsoft® Internet Explorer®, V6.0 or later
Summary of Contents for HNVE1
