HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B
75
11/09
6.
Type a case-sensitive
New Password
, and then re-type it in the
Verify Password
field.
7.
Click
Apply
to change the password for the selected user.
Upgrading the Firmware to the Device
To upgrade the firmware to the device:
1.
Navigate to
www.honeywellvideo.com
.
2.
Click
Customer Resources
➤
Download Center
➤
I Agree
to reach the
downloads page.
3.
Locate your device in the list.
4.
Under
Honeywell IP Firmware
, click the applicable link to download the firmware file
to your computer.
5.
Log onto the Honeywell IP Utility application.
6.
Discover and connect to the device.
7.
On the
System
tab, click
Firmware Upgrade
.
Figure 6-1
Firmware Upgrade
Note
It is important to confirm that the selected firmware file is consistent with the
connected device. For example, if you are connected to an HNVE1 encoder,
confirm that the file selected begins with
HNVE1_x.x.x.hex
.
8.
Follow the upgrade wizard steps to complete the upgrade.
9.
In the
Firmware Upgrade
dialog box, enter the complete path and name of the *.hex
file in the File Name field, or click
Browse
to select the file.
10. Click
Upgrade
. A progress bar shows the progress of the firmware upgrade, followed
by a message confirming that the upgrade is complete.
11. Click
OK
to reboot the device. The firmware upgrade takes about three minutes and
results in a temporary loss of connection with the device.
Summary of Contents for HNVE1
