HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B
51
11/09
Saving a Preset
After positioning the dome using the PTZ controls in Live View, you can quickly save that
position and then continue to monitor the area. Using this method, you can store only
camera presets 1-4.
Note
Any existing saved dome position in the preset is replaced with the new
preset configured in Live View. Configuring new presets in Live View
overrides/replaces existing saved presets (1-4).
To save a preset:
1.
Click the
Live View
tab.
2.
Position the dome (pan and tilt) and adjust the camera lens (zoom, focus, and iris)
using the PTZ controls.
3.
Type in a number from 1 to 4 in the
Quick Program Preset Details
field.
4.
Click
Program
to save the position to the preset.
Selecting a Preset
See
Table 4-3
for a list of reserved special presets based on specific PTZ protocols.
Table 4-3
Special Presets Available Based on Protocol
To select a preset:
1.
Click the
Live View
tab.
2.
Select a preset from the
Preset Details
list.
3.
Click
. The camera moves to the preset.
Protocol
Special Preset
Pelco P
80-99
Pelco D
80-99
IntelliBus
TM
71, 72, 73, 75, 98, 99
Diamond
71--79, 98, 99
MAXPRO-Net
80-99
VCL
80-99
Summary of Contents for HNVE1
