Honeywell HNVE1, Reference Manual

Page: 63 / 92

HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B 63
11/09
PTZ Camera Address Settings
For the PTZ dome and the HNVE1 to be able to communicate, the PTZ switch settings on
the PTZ dome and the HNVE1 encoder must be the same. The PTZ dome switch settings
must agree with the logical address of the PTZ ID. The default setting is 0001.
For example, for the ACUIX High Speed dome, the address selection is via rotary switches
SW1, SW2, SW3, and SW4.
Figure 5-4 Location of Address Rotary Switches on Sample PTZ Main Board
Table 5-2 Sample PTZ Dome Address Switch Settings
For more about PTZ dome switch settings, please refer to the reference guide provided with
your PTZ dome.
Presets
A preset is a saved dome position (pan, tilt, zoom) and lens setting (focus and iris). You can
configure a preset to save a PTZ dome position. Presets enable you to quickly move the
PTZ dome to a particular position while monitoring an area. Presets can be grouped and
sequenced into Preset Tours. When viewing video from a configured preset, the number
and name display in the top left corner of the screen.
There are 161 presets (0 to 160). PTZ dome positions can be saved in all the presets except
preset 71, 72, 73, 75, 98, and 99. These presets are preconfigured for functions such as
resetting cameras and others.
Address Value
SW1 Units digit
SW2 Tens digit
SW3 Hundreds digit
SW4 Thousands digit
Switches SW1, SW2, SW3, and
SW4, from top to bottom.