HNVE1 V2.1 1-Channel Encoder Reference Guide
Document 800-04195 Rev B
37
11/09
Note
After the IP Utility software is installed for the first time, you can change the
Administrator or Guest passwords and upgrade firmware.
Note
It is important to click
Apply
to save any configuration change.
1.
Log onto the Web-Client. There are two ways to launch the Web-Client and log on—
via the Honeywell IP Utility Program or directly from Internet Explorer.
Honeywell IP Utility
a.
Log onto the Honeywell IP Utility program.
b.
From the
Discovery
pane, click to select the device to launch its browser.
c.
To enable or disable the HTTP server, select or clear the
Enable HTTP Server
check box. By default, the HTTP server is enabled.
d.
From the
System
tab, click
Launch Browser
.
The Web-Client application for the selected device opens in Internet Explorer.
Internet Explorer
From Internet Explorer (v6.0+), type in the
URL
(IP address of the device) in the
Address bar to open the logon window.
2.
Select a
User
Name
and type in a
Password
.
a.
From the
User Name
drop-down list, select
Administrator
or
Guest
.
b.
In the
Password
field, type the case-sensitive password.
•
The default Administrator password is
1234.
•
The default Guest password is
guest.
c.
Click .
Installing Honeywell IP (ActiveX Plug-in)
A signed version of ActiveX® control is installed when you use the Web-Client to discover
connected devices for the first time. If you have a previous version of IP ActiveX is installed,
you are prompted to upgrade to Honeywell secure ActiveX control.
Summary of Contents for HNVE1
