Page INTRO-4
1 Dec 2003
MAINTENANCE MANUAL
CAS-100 COLLISION AVOIDANCE SYSTEM
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
34-45-4
7
Table Intro-1. Related Publications
(cont)
B. Verification
(1) Verification of these technical instructions is done by performance or by simulation of the
necessary procedures. Checks of the manual by the engineering staff make sure the
instructions and description data agree with the applicable engineering specifications
and drawings and are accurate and sufficient. The level of verification for this manual is
shown in the list that follows.
PUBLICATION
PUBLICATION No.
ATA No.
Standard Repair Procedures for Honeywell
Avionics Equipment Instruction Manual
A09-1100-004
Abbreviations for Use on Drawings and in Text* ASME Y14.38-1999
(Formerly ASME Y1.1-1989)
Graphic Symbols for Electrical and Electronics
Diagrams*
ANSI Y32.2 (1974)
Standard Letter Symbols for Units of
Measurement*
ANSI/IEEE Standard (Std) 260
(1978)
Graphic Symbols for Logic Functions*
ANSI/IEEE STD 91 (1984)
NOTES:
1. You can order a Honeywell publication from Honeywell as follows:
Telephone No. (425) 885-8367
Fax No. (425) 885-8722
Email: [email protected]
2. *Available from the American National Standards Institute, New York, NY
Subheading
Level of Verification
Testing and Fault Isolation
By performance, 1 Dec 2003
