CLUTCH REMOVAL
Remove the left case cover (Page 8-2).
Remove the movable drive face and drive belt.
Remove the 1 0 mm flange nut holding the clutch
outer with the universal holder and remove the
clutch outer.
Remove the movable driven face and clutch from
the drive shaft.
D R I V E N FACE DISASSEMBLY
Position the driven pulley in the clutch spring com·
pressor tool.
Turn the compressor handle to compress the spring.
Be sure the drive bolt is centered on the pulley.
Place the compressor in a vise and remove the 28
mm special nut.
Remove the compressor from the vise and back out
the drive bolt.
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
DRIVE AND DRIVEN PULLEYS/KICK STARTER/CLUTCH
CLUTCH OUTER
UNIVERSAL HOLDER
07725-0030000
1 0
mm
FLANGE NUT
LOCK NUT WRENCH, 39mm
�
07916-1870001
---..
0
•
87
CLUTCH SPRING COMPRESSOR
07960-KJ90000
8- 1 5
Summary of Contents for NHSO aeroBO 1983
