Honda NHSO aeroBO 1983, Shop Manual

Page: 132 / 184

HONDA
NHSO
Install a new bottom cone race over the steering
stem.
Install the old bottom cone race over the new bot­
tom cone race upside down.
Drive the bottom cone race with special tools until
it seats
in
place, then remove the old bottom cone
race.
FRONT FORK I NSTALLATION
Install the front fender on the front fork.
Coat the ball races with grease and install 26 steel
balls on the top ball race and 29 steel balls on the
bottom ball race.
Lubricate the top cone race with grease.
Screw in the race until snug against the top ball
race, then back it out 1/8 turn.
NOTE:
Check that the steering stem rotates freely
and there is no vertical play.
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
STEERING/FRONT WHEE L/BRAKE/SUSPENSION
FORK SEAL DRIVER
07747-001 0100 and
FORK SEAL
ATTACHMENT
077 47-0010400
O R
F O R K SEAL DRIVER
0794 7-3550000
FRONT FORK FENDER
TOP CONE RACE
141
OLD RACE
NEW RACE
1 2 - 2 3