CYLINDER HEAD/CY LINDER/PISTON
CYL I N D E R HEAD INSTALLATION
Install the cylinder head on the cylinder using a new
cylinder head gasket.
Install and tighten the four cylinder head bolts in a
criss-cross pattern.
TORQUE:
8-12 N·m (0.8-1.2 kg-m, 6-9ft-lb)
Install engine shroud B.
Clean the cylinder head mating face of the control
box and install the control box.
Install engine shroud A.
Install all removed parts in the reverse order of re
moval.
Perform the following inspections:
•
Compression test (Page 3-8)
•
Check for any abnormal engine noise.
•
Check for cylinder air leaks.
6 - 1 0
64
HONDA
NHSO
CYLINDER HEAD BOLTS
BOX
SHROUD A
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.
Summary of Contents for NHSO aeroBO 1983
