Remove the three flange nuts and remove the spoke
plate from the rim.
ASSEMBLY
Install the spoke plate onto the rim and tighten the
flange
nut.
TORQUE: 22-28
N·m
(2.2-2.8
kg·m,
16-20
ft·lb)
Pack all bearing cavities with grease.
Drive in the left bearing and install the distance
collar.
Then drive in the right bearing.
NOTE:
•
Drive in the bearings squarely.
• Install the bearings with the sealed ends
facing out.
•
Contaminated brake linings reduce stop
ping power. Keep grease off the linings and
brake drum.
Apply grease to the inside of the dust seal.
Install the dust seal and axle collar.
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
STEERING/FRONT WHEEL/BRAKE/SUSPE NSION
FLANGE N UTS
SPOKE PLATE
ATTACHMENT, 32
x
35
mm
07746-0010100
DUST SEAL
1
2
9
DRIVER
077 49-001 0000
PI LOT, 12 mm
077 4 6-0040200
COLLAR
1 2 - 1 1
Summary of Contents for NHSO aeroBO 1983
