Install the float valve, float and float pin.
FLOAT LEVEL INSPECTION
Measure the float level with the float tip just contact·
ing the float valve.
FLOAT LEVEL: 8.5 mm
(0.335
in)
Adjust by carefully bending the float arm until the
float tip.
Check operation of the float and install the float
chamber.
CARBURETOR INSTALLATION
CAUTION:
Do not allow foreign particles to enter the
car·
buretor.
Connect the control box and bystarter tubes to the
carburetor.
Install the carburetor and connect the fuel tube.
Install the frame center cover if it was removed.
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
FUEL
SYSTEM
CONTROL BOX TUBE
BYSTARTER TUBE
CARBURETOR
FUEL TUBE
41
4 - 7
Summary of Contents for NHSO aeroBO 1983
