1 OVER
VIEW
5
How the Honda Robotic Lawn mower works / Features
Leave no more than 0.2 in (5 mm) of space between parts of the boundary
wire. Make sure that parts of the boundary wire do not overlap or cross.
Leave 11.8 in (30 cm) to
19.7 in (50 cm) of space
between the boundary
wire and large objects.
Lay boundary wire
around objects that
you want the lawn
mower to avoid.
Leave 3.3 ft (1m) of space
between the boundary
wire and dangerous areas
such as ponds or holes.
Leave 11.8 in (30 cm)
to 19.7 in (50 cm) of
space between the
boundary wire and the
mowing area boundary.
Laying boundary wire
The boundary wire location determines the parameters of the mowing area, this area may
consist of multiple sections in which the lawn mower can operate. For mowing start point
setup and detailed information please see “4 MENU SETTINGS” (
The work area must conform to the following conditions if it includes sloping areas.
•
The lawn mower can operate on slopes of 24° (45%). Do not include slopes in the work area that are more than 24° (45%).
•
Lay the boundary wire in locations that have a slope of less than 10° (17%).
•
If the location in which you are laying the boundary wire has a slope that is steeper than 10° (17%), do the following:
-
Do not lay the boundary wire laterally across a slope that is steeper than 10°.
-
Lay the boundary wire laterally across a relatively
fl
at space, with a slope of less than 10°, that comes after the location where
the slope is more than 10° (17%). (Refer to the diagram below.)
* Laying the boundary wire where the slope is too steep has a bad effect on the lawn mower. This is because the lawn mower follows
along where the boundary wire has been laid.
More than
10° (17%)
Less than
10° (17%)
Incorrect
Correct
Useful features
The growth speed of lawn depends on the
season. With this function, you can con
fi
gure
the ratio of the mowing time for each season.
You can set the blade speed, wheel speed and
timer for operating the lawn mower quietly.
With this function, the lawn mower can be
focused on mowing the area where the lawn is
not completely mown, or the growth speed of
the lawn is fast.
With this function, you can mow the unmown
area along the boundary wire.
Safety
Blades on the lawn mower
automatically stop when:
- You lift the lawn mower.
- The lawn mower is on a surface
with a slope that is too steep.
- The lawn mower becomes
overturned.
Quiet operation
The motor and rotating blades
of the Honda Robotic Lawn
mower operate more quietly than
traditional engine lawn mowers.
NOTE:
- Make sure to
fi
ll in “LAWN DIAGRAM” referring to the layout of boundary wire (
