Honda Miimo HRM310 Owner'S Manual Download

Page: 17 / 88

3 PREP

ARA

TION

Setting up the lawn mower

Setting up the lawn mower

When

rst turning on the lawn mower, the initial settings and setup wizard will appear.

Through the initial settings, you can con

gure the display language, internal date and time, and create your

PIN (Personal Identi

cation Number).

Through the setup wizard, you can con

gure the settings for the mowing operation of your lawn mower.

NOTE:

- If your dealer already con

gured the setup wizard, the setup wizard screen is not displayed.

Turning on the power

After the battery is charged, press the

(On) button to turn on the lawn mower.

The

(On) button is located on the control panel towards the rear side of the lawn mower.

WARNING

- Do not insert your

nger beneath the closed operation panel cover or height adjustment dial cover.

Press the manual STOP button.

The control panel cover pops up.

Manual STOP button

Press the

(On) button on the control panel.

The power turns on, and the initial setup screen on the control panel is displayed.

Summary of Contents for Miimo HRM310

























































































Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands

Honda Miimo HRM310, Owner'S Manual

Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands