Honda Miimo HRM310 Owner'S Manual Download

Page: 58 / 88

Operating the lawn mower in Auto mode

Auto mode operation

These instructions can be used to operate the lawn mower at the time scheduled for the Auto mode settings.

NOTE:

- For details on settings, see “4 MENU SETTINGS” (

page 25).

- Make sure to press the manual STOP button before performing the following procedure.

Press the

button.

If the [Auto] is displayed on the Home screen, go to
step 2.
If the [Man] is displayed on the Home screen, press the

button until the [Auto] is displayed.

For details on the icons in the screen, see “Home screen”
(

page 11).

17:01 Fri

Auto

100

Close the control panel cover.

Setting is now complete. The lawn mower starts mowing at the time scheduled for the Auto mode.
For details on settings, see “4 MENU SETTINGS” (

page 25).

NOTE:

- If you press the

(Off) button after con

guring these settings, the lawn mower will not activate.

Summary of Contents for Miimo HRM310

























































































Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands

Honda Miimo HRM310, Owner'S Manual

Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands