Honda Miimo HRM310 Owner'S Manual Download

Page: 47 / 88

4 MENU SETTINGS

Checking the system

Home screen

[3.Diagonostics]

[2.Test start points]

[0.Home]

You can test if the lawn mower will correctly return to
the docking station.

NOTE:

- Perform this test when the lawn mower is not

connected to the docking station.

Select [Clockwise(CW)] or
[Counter-clockwise(CCW)].

Press the

button.

Close the control panel cover.

The lawn mower returns to the docking station.

When the lawn mower is docked at the
docking station, press the manual STOP
button.

The control panel cover pops up.
The message “Do you want to modify the homing
setup?” appears on the display.

Select [Yes] or [No] to the question and press

button.

If you select [Yes], Homing setup screen is
displayed. You can modify the homing settings.
If you select [No], the previous screen is
displayed.

NOTE:

- For details on the homing settings, see

“Setting how the lawn mower returns to
the docking station” (

page 12).

Menu screen

Summary of Contents for Miimo HRM310

























































































Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands

Honda Miimo HRM310, Owner'S Manual

Search results

Summary of Contents for Miimo HRM310

Reviews:

Related manuals for Miimo HRM310

Brands by name

Popular brands