42
Setting the lawn mower operation
Home screen
J
[2.Lawn setup]
J
[4.Homing setup]
J
[2.Capacity for homing]
You can set the percentage of remaining amount of
the battery when the lawn mower starts to go back to
the docking station.
TIPS
The longer the wire is, the higher this value
should be.
1
Select [Auto] or Enter a percentage of
battery residual capacity.
The range of the percentage of battery
residual capacity is 10 – 50%.
2
Press the
H
button.
Home screen
J
[2.Lawn setup]
J
[4.Homing setup]
J
[0.Home]
You can test if the lawn mower will correctly return to
the docking station.
NOTE:
- Perform this test when the lawn mower is not
connected to the docking station.
TIPS
Test returning through the different passages.
1
Select [Clockwise(CW )] or
[ Counter-clockwise(CCW )].
2
Press the
H
button.
3
Close the control panel cover.
The lawn mower returns to the docking
station.
4
When the lawn mower is docked at the
docking station, press the manual STOP
button.
The control panel cover pops up.
The message “Test
fi
nished” appears on the
display.
Menu screen
Menu screen
