4 MENU SETTINGS
33
Setting the lawn mower operation
Mowing start points
Home screen
J
[2.Lawn setup]
J
[1.Auto mode]
J
[1.Mowing start points]
J
[1.Point 1] to [5.Point 5]
The lawn mower travels to this location along
the boundary wire, and then turns away from the
boundary wire to begin mowing. This allows you to
send the lawn mower to an area which is dif
fi
cult to
access.
TIPS
Don’t make the distance value bigger than it
needs to be. This will maximize the cutting
time.
1
Select (Clockwise) or
(Counter-clockwise), enter the values of
the distance from the docking station to start
cutting, and enter a percentage of the ratio
which the lawn mower operates.
2
Select [NEXT] and press the
H
button.
3
Enter the values of the width setting and
angle, and press the
H
button.
NOTE:
- By selecting [TEST], you can check the
settings of each start point before mowing.
For details, see “Test start point” (
M
page
4
Press the
G
button to return to the previous
screen.
Mowing start points
2/2
Point Width
Angle
1
3 - 6
5 0 - 1 5 0
2
3 - 6
5 0 - 1 5 0
3
3 - 6
5 0 - 1 5 0
4
3 - 6
5 0 - 1 5 0
5
3 - 6
5 0 - 1 5 0
TEST (0-1 2)
(1 0‘- 1 7 0‘)
Mowing start points
1/2
Point / (0-2600ft)
1 /
0 0 0 ft
0 0 0 %
2 /
0 0 0 ft
0 0 0 %
3 /
0 0 0 ft
0 0 0 %
4 /
0 0 0 ft
0 0 0 %
5 /
0 0 0 ft
0 0 0 %
NEXT
Set an area operation ratio
if you want to mow more
frequently from a certain start
point.
Set whether the lawn mower
should travel clockwise or
counter-clockwise along the
boundary wire to reach a start
point.
Sets the minimum and
maximum distance between
the lawn mower and the
boundary wire when following
the boundary wire.
Sets the distance from the
docking station to start cutting.
When leaving the boundary
wire, set the minimum and
maximum angle to turn from
the boundary wire.
EX: HRM520
Menu screen
