Honda Accord lx 1993 Reference Owner'S Manual Download Page 14

Page: 14 / 178

Wearing a Lap/Shoulder Belt

Before putting on a front seat belt, be sure your seat is adjusted

forward or backward to a good driving or riding position and the

back of your seat is upright (see page

1. Pull the latch plate across your body and insert it into the buckle.

Tug on the belt to make sure the latch is securely locked.

2. Check that the belt is not twisted.

3. Position the lap portion of the belt as low as possible across your

hips, not across your stomach. This lets your strong pelvic bones
take the force of a crash.

The Seat Belt System and How It Works (cont'd)

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands