Honda Accord lx 1993 Reference Owner'S Manual Download Page 79

Page: 79 / 178

Tape Direction Indicator

Load the cassette into the slot with the tape opening to the right.

The ( ) will light when the upper side is playing. The ( ) will light

when the bottom side is playing.

Program Selector (PROG)

Push to change the direction of tape play.

Auto Reverse Feature: The tape direction automatically reverses

when the end of the tape is reached in play or FF mode and plays

the other side.

Fast Forward/Rewind (FF/REW)

Note which Tape Direction Indicator is lighted, then push the
appropriate button to rapidly wind the tape in the same direction

(FF) or in the opposite direction (REW).

(US: EX, Canada: EX-R)

To rewind the tape, push the FF/REW/TMS button down then

release it. You will see REW in the display. To fast forward the tape,

push the button up then release it. You will see FF displayed. To

stop rewind or fast forward, press the PROG/PLAY button or push

the FF/REW/TMS switch again.

Play (PLAY)

Push the PLAY button to resume tape play and stop rewind or fast

forward operation.

(On US: LX/EX/SE/Anniversary Edition, Canada: EX/EX-R/SE, the

indicator will light.)

Repeat Button (REPEAT)

(US: LX/EX/SE/Anniversary Edition, Canada: EX/EX-R/SE)

Push the REPEAT button (indicator on) to return to the beginning of

a song or section of programming and repeat its play. Push the
button again (indicator off) to cancel the repeat function and resume
normal play.

(cont'd)

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands