Honda Accord lx 1993 Reference Owner'S Manual Download Page 46

Page: 46 / 178

Windshield Wipers/Washer/Defogger

Windshield Wipers

Switch the wipers to INT for inter-
mittent operation, LO for low speed

operation, and HI for high speed
operation.

In fog or very light rain, push the

lever down to the MIST position for

temporary high speed operation of
the wipers. The wipers will return

to the rest position and the motor

will shut off as soon as you release

the lever.

Push down

Washer

Pull the wiper switch lever toward you to turn on the washer.

(Except US: DX)

The windshield wipers will sweep when the washer is operated.

Check the washer fluid regularly, especially during bad weather, or
whenever the washer has been in frequent use. The float in the
neck of the reservoir indicates the fluid level.

WINDSHIELD WASHER

RESERVOIR CAPACITY:

US Cars: 2.5 (2.6 US q t , 2.2 Imp qt)
Canada Cars: 4.5 (4.8 US q t , 4.0 Imp qt)

Use a good quality commercial washer fluid for all-weather cleaning.

Pull

WASHER FLUID RESERVOIR

FLOAT

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands