Honda Accord lx 1993 Reference Owner'S Manual Download Page 54

Page: 54 / 178

Hood and Parking Brake

Hood

To open the hood, pull back on the

handle located under the dash on

the driver's side.

Pull to release

The hood latch is spring-loaded, so the hood will pop up slightly.

Release the safety catch under the front center of the hood by
pushing the rubber-tipped handle up.

Lift the hood and prop it open with the support rod.

To close, take the support rod down, place it back in its holder,

lower the hood until it is approximately one foot from the closed
position, then let it drop. Be sure the hood is securely latched before

driving away.

Parking Brake

To apply the parking brake, pull

up on the lever. To release it, pull
up slightly, push the button, and
lower the lever; when fully
released, the BRAKE (US cars), or

( C a n a d i a n c a r s )

indicator will go out.

Pull up

SUPPORT
ROD

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands