Honda Accord lx 1993 Reference Owner'S Manual Download Page 59

Page: 59 / 178

Heating and Cooling

The vents, heater and air conditioning are combined in one system;
adjusting four basic controls to different settings can provide a full

range of interior temperatures for safe and comfortable driving.

(Air conditioning is optional on US: DX, Canada: LX.)

Ventilation

The flow-through ventilation system can provide fresh air to the

interior when the car is moving or stopped, even with the windows

closed.

NOTE:

For proper air flow, the flow-through vents must not be covered.
Keep the air inlet at the base of the windshield free of leaves or

other debris.

AIR INLET

AIR OUTLET

You can adjust the controls to direct cool or warm outside air

throughout the car for defogging windows, heating, or cooling by

turning on the fan.

(cont'd)

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands