Honda Accord lx 1993 Reference Owner'S Manual Download Page 141

Page: 141 / 178

Air Conditioning Care

Condenser and Radiator

Check the engine radiator and the air conditioning condenser (in

front of the radiator) for accumulated dirt, insects or leaves.

Carefully brush or hose them off to assure maximum cooling

performance.

CAUTION:

Radiator and condenser fins are very thin and easily damaged; do

not bend them with the high water pressure or brush.

Compressor Drive Belt

Check the compressor belt tension monthly, during periods when

you use the air conditioning a lot.

If the engine has been running, some engine components may be

hot enough to burn you.

When pushed with 98 N (22 Ib) of force midway between the
alternator pulley and the engine crankshaft pulley, the belt should
deflect about:

10—12 mm (0.4—0.5 in)

(cont'd)

ALTERNATOR

DRIVE PULLEY

CRANKSHAFT
PULLEY

COMPRESSOR DRIVE
PULLEY

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands