Honda Accord lx 1993 Reference Owner'S Manual Download Page 161

Page: 161 / 178

DOT Tire Quality Grades

US Cars

The tires on your car meet Federal Safety Requirements. All tires

are also "graded" according to Department of Transportation (DOT)
standards for tread wear, traction and temperature.

Tread Wear

The tread wear grade is a comparative rating based on the wear rate

of the tire when tested under controlled conditions on a specified

government test course. For example, a tire graded 150 would wear

one and one half (1-1/2) times as well on the government course as

a tire graded 100.

The relative performance of tires depends upon the actual

conditions of their use, however, and may depart significantly from

the norm due to variations in driving habits, service practices and

differences in road characteristics and climate.

Traction

The traction grades, from highest to lowest, are A, B, and C, and

they represent the tire's ability to stop on wet pavement as

measured under controlled conditions on specified government test

surfaces of asphalt and concrete. A tire marked C may have poor

traction performance.

The traction grades assigned are based on braking (straight ahead)
traction tests and do not include cornering (turning) traction.

(cont'd)

Three grades

are shown on the

tire sidewall.

TIRE

WHEEL RIM

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands