Honda Accord lx 1993 Reference Owner'S Manual Download Page 132

Page: 132 / 178

The condition of the battery can be determined by checking the

test indicator. Service as required according to the label on the

battery.

Any corrosion around the positive and negative terminals should be
washed off with a solution of baking soda and warm water. Dry the

terminals and then coat them with grease.

The battery gives off explosive gases; keep sparks, flames, and

cigarettes away. Provide adequate ventilation when charging or
using the battery in an enclosed space.
The battery contains sulfuric acid (electrolyte). Contact with
skin or eyes may cause severe burns. Wear protective clothing
and a face shield.

— If electrolyte gets on your skin, flush with water.
— If electrolyte gets in your eyes, flush with water for at least

15 minutes and call a physician immediately.

Electrolyte is poisonous.

— If swallowed, drink large quantities of water or milk and follow

with milk of magnesia or vegetable oil and get immediate
medical assistance.

KEEP OUT OF REACH OF CHILDREN.

Battery

TERMINAL

TEST INDICATOR

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands