Honda Accord lx 1993 Reference Owner'S Manual Download Page 140

Page: 140 / 178

Tires (cont'd)

Tire Balancing

Unbalanced tires may affect handling and tire wear. A tire should

always be rebalanced after it has been dismounted from the wheel.

Your original tires were properly balanced before the car left the
factory, but may need rebalancing at some time during the life of the

tire. Tire balancing for the COMPACT spare is not necessary.

CAUTION:

Use only Genuine Honda aluminum wheel weights if your car is

equipped with aluminum wheels. Non genuine Honda wheel
weights may corrode and damage the aluminum wheel.

Tire Rotation

Tires may wear unevenly when used for a long time in the same

position on the car. To avoid this, rotate the tires every 7,500 miles
(12,000 km). If abnormal or uneven wear develops between

rotations, the cause should be found and corrected as soon as

possible. The illustration shows how the tires can be rotated. The

COMPACT spare tire must not be included in tire rotation.

NOTE:

Brake pads should be inspected for wear whenever the tires are

rotated.

Tire Traction

Worn tires or slippery road surfaces can reduce driving, cornering

and braking traction. To reduce the possibility of losing traction,
slow down when the road gets slippery, replace tires when wear
indicators are visible, and KEEP TIRES PROPERLY INFLATED.

Front

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands