Honda Accord lx 1993 Reference Owner'S Manual Download Page 156

Page: 156 / 178

Towing

If towing is necessary, contact a professional towing service. Your

authorized Honda dealer can assist you with detailed towing

instructions.

Never use tow chains or rope to tow a car; your ability to safely

control the car may be adversely affected.

We recommend the following:

Flat Bed Equipment

—Entire car is winched on a flat bed vehicle.

This is the best way of transporting your Honda.

Wheel Lift Type

—Tow with the front wheels off the ground.

If the car can only be towed with the front wheels on the ground,

make sure the transmission is full of fluid (see pages

120

—

121

and t o w with the transmission in neutral (N) and the ignition key in

the I position.

CAUTION:

To avoid serious damage on automatic transmission cars, first

start the engine and shift to D

, then to N and shut the engine off.

If the engine does not run, or the transmission cannot be shifted

while the engine is running, the car must be transported on flat

bed equipment.

Check local regulations for towing.

CAUTION:

Do not exceed 35 mph (55 km/h) or tow for distances of more
than 50 miles (80 km).

If a sling type tow is used, the tow truck driver should position

wood spacer blocks between your car's frame and the chains
and lift straps to avoid damaging the bumper and the body.

Do not use the bumpers to lift the car or to support the car's

weight while towing.

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands