Honda Accord lx 1993 Reference Owner'S Manual Download Page 131

Page: 131 / 178

Wiper Blades

For maximum visibility, replace worn or cracked wiper blades when

you notice they do not wipe the windshield cleanly or smoothly.

To Replace Worn-out Blades

1. Detach the blade assembly from

the arm by pressing the lock tab

in, then pushing the blade toward

the base of the arm.

2. Firmly grasp the end of the blade

rubber and pull until the tabs are

free of the metal support.

3. Remove the metal retainers from

the worn-out blade rubber and

put them in a new blade rubber.

4. Insert the new blade rubber from

the opposite side of the blade
tabs and position the tabs in the

metal support.

5. Reinstall the blade assembly on

the wiper arm.

Press Lock
Tab in

Push

METAL SUPPORT

Pull out

TABS

RETAINERS

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands