Honda Accord lx 1993 Reference Owner'S Manual Download Page 8

Page: 8 / 178

Seats (cont'd)

Driver's Lumbar Support

(US: EX/SE, Canada: EX-R/SE)

Support of the lower back can be

adjusted by turning the knob on the

driver's armrest to give more or less
support.

Do not try to adjust lumbar support
while driving. Make the adjustment
while sitting in your normal driving
position before driving away.

Driver's Seat Center Armrest
(US: LX/EX/SE/Anniversary Edition,

Canada: EX/EX-R/SE)

The angle of the driver's armrest on

the driver's seat adjusts to five

positions. To lower the armrest,

push the button on the driver's side

of the armrest and lower the

armrest.

Do not try to adjust the armrest

while driving. Make the adjustment
before driving away.

Rear Seat Armrest

(US: LX/EX/SE/Anniversary Edition,
Canada: EX/EX-R/SE)

The rear seat armrest is located at
the center of the rear seat-back and

can be used by pulling the tab out.

Push

Pull out

Summary of Contents for Accord lx 1993



















































































































































































Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands

Honda Accord lx 1993, Reference Owner'S Manual

Search results

Summary of Contents for Accord lx 1993

Reviews:

Related manuals for Accord lx 1993

Brands by name

Popular brands