−
−
−
To check the transmission fluid level,
remove the bolt, then pull down the
left part of the under cover.
Check the fluid level with the
transmission at normal operating
temperature and the car sitting on
level ground.
Put the under cover back in place.
If you are not sure how to check and
add fluid, contact your dealer.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.
If genuine Honda MTF is not
available, you may use an API
service SJ or higher grade motor oil
with a viscosity of SAE 10W-30 or
10W-40 as a temporary replacement.
However, motor oil does not contain
the proper additives and continued
use can cause stiffer shifting.
Replace as soon as it is convenient.
Remove the transmission filler bolt
and carefully feel inside the bolt hole
with your finger. The fluid level
should be up to the edge of the bolt
hole. If it is not, add genuine Honda
Manual Transmission Fluid (MTF)
until it starts to run out of the hole.
Reinstall the filler bolt securely.
Tighten it to:
CONTINUED
5-speed Manual Transmission
Transmission Fluid
Maintenance
2.0
engine model
443
Correct level
FILLER BOLT
BOLT
39
49 N·m (4
5 kgf·m , 29
36
lbf·ft)
05/10/03 20:23:31 32SEA630_446
Summary of Contents for 2006 Accord
Page 9: ...6 05 10 03 19 28 04 32SEA630_009 ...
Page 199: ...Comfort and Convenience Features Audio System B Type 196 05 10 03 19 52 10 32SEA630_199 ...
Page 407: ...404 05 10 03 20 18 13 32SEA630_407 ...
Page 497: ...494 05 10 03 20 30 24 32SEA630_497 ...