Open the boot.
Pull the bulb straight out of its
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Push the new bulb straight into
the socket until it bottoms.
Put the inner fender cover in place.
Install the holding clips. Lock each
one in place by pushing on the
centre.
Remove the light assembly cover
by pulling its outside edge.
Determine which of the two bulbs
is burned out: stop/tail-light or
turn signal light.
Remove the socket for that bulb
by turning it one-quarter turn
anticlockwise.
Turn on the position lights to
make sure the new bulb works.
1.
3.
2.
6.
7.
8.
4.
Replacing Rear Bulbs
(in Fenders)
Lights
Maintenance
480
COVER
BULB
BULB
05/10/03 20:28:39 32SEA630_483
Summary of Contents for 2006 Accord
Page 9: ...6 05 10 03 19 28 04 32SEA630_009 ...
Page 199: ...Comfort and Convenience Features Audio System B Type 196 05 10 03 19 52 10 32SEA630_199 ...
Page 407: ...404 05 10 03 20 18 13 32SEA630_407 ...
Page 497: ...494 05 10 03 20 30 24 32SEA630_497 ...