Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
anticlockwise.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the front fog lights to test
the new bulb.
Reinstall the side under cover.
Make sure it is installed under the
edge of the bumper.
Reinstall the two mounting bolts
on the side under cover and
tighten them securely. Put the
holding clip back on the side
under cover and push on the
centre until it locks (the centre is
flush with the head).
3.
4.
5.
6.
7.
8.
9.
Lights
Maintenance
485
BULB
05/10/03 20:29:18 32SEA630_488
Summary of Contents for 2006 Accord
Page 9: ...6 05 10 03 19 28 04 32SEA630_009 ...
Page 199: ...Comfort and Convenience Features Audio System B Type 196 05 10 03 19 52 10 32SEA630_199 ...
Page 407: ...404 05 10 03 20 18 13 32SEA630_407 ...
Page 497: ...494 05 10 03 20 30 24 32SEA630_497 ...