−
−
−
−
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
To store a frequency:
Select the desired band, AM (LW),
AM(MW) or FM. FM1 and FM2
let you store two frequencies with
each preset bar.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Pick the preset number (1
6)
you want for that station. Press
the left or right side of the bar and
hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on each AM (LW,
MW) and twelve on FM.
Once a station’s frequency is stored,
simply press and release the left or
right side of the proper preset bar to
tune to it.
The preset frequencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio fuse is
removed.
You can store the
frequencies of your favourite radio
stations in the three preset bars.
Each side of the bars (1
6) will
store one frequency on each AM
band (LW, MW), and two
frequencies on the FM band.
1.
2.
3.
4.
SCAN
Preset
Audio System (B Type)
Comf ort and Convenience Features
222
05/10/03 19:55:14 32SEA630_225
Summary of Contents for 2006 Accord
Page 9: ...6 05 10 03 19 28 04 32SEA630_009 ...
Page 199: ...Comfort and Convenience Features Audio System B Type 196 05 10 03 19 52 10 32SEA630_199 ...
Page 407: ...404 05 10 03 20 18 13 32SEA630_407 ...
Page 497: ...494 05 10 03 20 30 24 32SEA630_497 ...