Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder.
Turn on the position lights and
check that the new bulb is
working.
Put the lens back on the bulb
holder and push it until it latches.
Slide the left side of the light
assembly into the hole. Push on
the right side to latch the
assembly into place.
Align and pop the snap fasteners
in place and reinstall the licence
plate garnish.
If you are not sure how to replace
the bulbs, have them replaced by
your dealer.
Pull the bulb straight out of its
bulb holder. Push the new bulb in
until it bottoms in the bulb holder.
4.
5.
6.
7.
8.
9.
Lights
Maintenance
487
BULB
05/10/03 20:29:33 32SEA630_490
Summary of Contents for 2006 Accord
Page 9: ...6 05 10 03 19 28 04 32SEA630_009 ...
Page 199: ...Comfort and Convenience Features Audio System B Type 196 05 10 03 19 52 10 32SEA630_199 ...
Page 407: ...404 05 10 03 20 18 13 32SEA630_407 ...
Page 497: ...494 05 10 03 20 30 24 32SEA630_497 ...