background image

51252  pg 1

   

0410

 Rev.  

B

TM

®

Inc.

Installation Tips

Before you begin installing the Rotary Paddle
Handle Latch assembly,  read all instructions
thoroughly. After completion of the project,
please keep the instruction for future reference.

This product is designed primarily to enhance the appear-
ance of the vehicle and to shield the occupants from ordinary
weather conditions. Do not rely in any way on the compo-
nents of this product to contain occupants within the vehicle,
or to protect against injury or death in the event of an
accident. This product will not protect the occupants from
falling objects. Never operate vehicle in excess of
manufacturer’s specifications.

WEAR SEAT BELTS AT ALL TIMES

Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in poor fit and could place occupants of the vehicle in a
potentially dangerous situation.

WARNING

Rotary Paddle Handle Latch Kit

Installation Instructions

For:  Wrangler (1997-current)            Part Number: 51252

Summary of Contents for 51252

Page 1: ...nts of this product to contain occupants within the vehicle or to protect against injury or death in the event of an accident This product will not protect the occupants from falling objects Never operate vehicle in excess of manufacturer s specifications WEAR SEAT BELTS AT ALL TIMES Read and follow precisely all installation instructions pro vided when installing this product Failure to do so may...

Page 2: ...t have the latch pin assembly illustrated here you have an incorrect part for your vehicle Please call the 1 800 number before attempting installation Latches Rotary Paddle Handle Rt Qty 1 454 42 Lt Qty 1 454 43 Special Note The Rotary Latch Paddle Handle will only latch on the automobile manufacturer s original equipment steel latch pin located on the vehicle Do Not adjust or remove this part STO...

Page 3: ...o not tighten the screws until all four are in place Important You should check alignment of the Paddle Handle to the steel latch pin before tightening the screws If out of alignment align and retighten the screws securely Trim the excess fabric around the Paddle Handle Repeat for both lower doors It is important that the Paddle Handle must align correctly with the automobile manufacturer s origin...

Page 4: ...ism negligence misinstallation misuse Acts of God or by defective parts not manufactured by us is not covered under this warranty THE WARRANTY TIME PERIOD IS AS FOLLOWS ALL SOFT GOODS MANUFACTURED BY OUR COMPANY USING PRIMARILY VINYLS PLASTICS AND OR FOAM ONE YEAR FROM DATE OF PURCHASE ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN D...

Reviews: