Holiday Savoy LX 2006, Manual

Page: 96 / 154

96 • Section 5 — Equipment Savoy SL & LX 5th Wheel & Travel Trailer
Slide-out Extending
1. Locate the two locking bar mechanisms on top of the slide-out room inside
the recreational vehicle. Locking bars vary from model to model. Remove
the bars from between the wall and the top of the slide-out room. Store the
bars for future use when the recreational vehicle is to be moved.
2. Press and hold the slide-out room switch in the OUT position. The slide-out
room will move slowly to the out position. The drive motor will not stop automatically. To
stop the slide-out room before reaching the OUT position, RELEASE the switch. To
continue room movement, push and hold the switch in.
3. Release switch when slide-out is fully extended. The room will lock in position.
Slide-out Retracting
1. Check for sufficient clearance inside the recreational vehicle for the slide-out room.
2. If applicable, clean the floor to prevent surface damage.
3. Remove debris from the outside top of room.
4. Press and hold the switch IN. To stop the slide-out room before the room reaches IN position, release the
switch. To continue room movement, push and hold the switch in.
5. Release the switch, which will lock the room into position.
6. After the slide-out room is retracted, locate the two removable locking bar mechanisms. Place the bars
between the wall and the top edge of the slide-out room and lock in place.
Manual Override
The slide-out system is equipped with a manual override that allows the room to be retracted in the event of a
power loss.
If the Room Does NOT Move When the Switch is Pressed:
Check if the battery is fully charged and
connected. Make sure the transit bars are removed.
After the previous items have been checked and the room still does not move when the slide-out switch is
pressed, follow these simple steps to manually override the slide-out room:
1. Disconnect the battery cables before manually overriding the slide-out system.
2. Locate the slide-out crank that has a slotted end.
3. Locate the crank access hole on the outside of the recreational vehicle. Access
will be on the opposite side from the slide-out. The crank access hole is located
near the entry steps. A label affixed to the recreational vehicle reads “Manual
Slide-out Crank,” indicating location.
4. Insert the crank to engage the motor shaft.
5. Turn the crank to move the slide-out room fully in (or out).
030802
030793
030833