Holiday Savoy LX 2006, Manual

Page: 59 / 154

Savoy SL & LX 5th Wheel & Travel Trailer 2006 Exterior & Interior Care — Section 3 • 59
Controlling Moisture Condensation: Reduce or eliminate interior moisture condensation during cold
weather by using the following steps.
• Partially open the roof vents and windows so that outside air can circulate into the interior. Increase the
ventilation when large numbers of people are in the recreational vehicle. Even in raining or snowing
conditions the air outside will be far drier than the interior air.
• Install a dehumidifier. Continuous use of a dehumidifier is effective in removing excess moisture from the
interior air. Using a dehumidifier is not a cure-all, however, it will reduce the amount of outside air needed
for ventilation.
• Run the range vent fan when cooking and the bath vent fan (or open the bath vent) when bathing, to reduce
water vapor. Avoid excessive boiling or use of hot water as it produces steam.
• Do not heat the recreational vehicle interior with the range or oven. Heating with the range or oven
increases the risk of toxic fumes and allows oxygen depletion. Also, open flames add moisture to the
interior air increasing condensation.
• In very cold weather leave the cabinet and closet doors partially open. The air flow will warm and
ventilate the interior of the storage compartments and the exterior wall surface, reducing or eliminating
condensation and preventing the possibility of ice formations.
Mold & Mildew
Mold is a vegetative growth or a plant belonging to the Fungi group. Being a plant, mold will need food to
grow. Mold growth can result from moisture and certain temperatures. Some molds can cause mildew wherever
there is poor air circulation, poor lighting, damp and warm areas. Molds, as they grow, will cause considerable
damage and leave a musty odor, discolor fabric, and stain surfaces. Molds produce microscopic cells called
“spores” that can spread easily through the air.
Basic Mold Cleanup:
The key to controlling mold is keeping things clean and limiting moisture. If mold is a
problem in the recreational vehicle, here are some suggestions on resolving the condition:
• Eliminate the source of the water problem or fix the leak to prevent mold growth.
• Materials or furnishings must be cleaned and dried within 24 to 48 hours to prevent mold growth.
• Clean mold off hard surfaces with water and detergent. Dry the surface completely.
• Reduce indoor humidity to 30 to 60% to decrease mold growth by venting bathrooms, dryers and other
moisture-generating sources to the outside using conditioners and de-humidifiers. Increase ventilation by
using exhaust fans when cooking, dishwashing, showering and cleaning.
• Open doors between rooms (especially doors to closets that may be colder than the rooms) to increase air
circulation.
• Respond promptly when signs of moisture and/or mold appear. Repair leaks or wipe spills immediately.
• If materials with mold cannot be cleaned, they should be removed and properly disposed of.